Polar Cub 25" Roll Laminator
Manual 25" laminator for mounting prints using adhesive coated papers or boards
25" wide
Includes Flip-up Print Media Guide Bar to hold prints for mounting
Media Guide removes easily for laminating
Includes Alignment Guide and X-acto foam board cutter
Manufactured by Drytac - the leading equipment and adhesive company
Can mount boards up to 1/2" thick
Uses all of our adhesive coated boards
Rugged Design and Ready to use out of the box
Great for mounting larger prints
Professional grade silicon rollers provide even pressure and insure bubble free results and any exposed adhesive on the board will not stick to the rollers
To set the gap between the rollers to match the thickness of your board, place your board between the rollers and close the rollers by turning the height control knob until there is no light between the board and the rollers.(see picture 1) Then tighten the rolls a half turn on the height control knob.
Peel back the first inch of the release liner
Smoothly tack down your print to the inch of exposed adhesive
Insert the tacked edge into the laminator, remove the remainder of the release liner exposing the adhesive on the rest of the board (at left see picture 2)
Insert your print between the Media Guide and top roll so that it is smooth against the rollers
Close the Media Guide to hold your print
Turn the handle to pull your print and board through the laminator (see picture 3)
Your print will be mounted
Trim your print if desired
Specifications
Width 25 inches
Maximum roll opening - 1"
Roll covering - Silicon
Cabinet construction - metal
Shipping Weight 32 lbs.
Warranty - 1 year
See how easy the Polar Cub is to use
..
..
Easy to Use
Specifications
1
